Embrizo

How to embroider a grandma sweatshirt with grandkids' names

Embroider a Grandma, Nana or Mama sweatshirt with the grandkids' names: layouts, how many names fit, fonts, sizes, fleece backing, spelling and pricing.

Updated · 12 min read

A sweatshirt embroidered with Grandma in script and the grandkids' names underneath
Batch name embroidery screenshotFree previewBatch name embroideryPaste a list of names and digitize each one in the same font, height and thread, with width checks.Open the tool

The Grandma sweatshirt is one of the most-requested embroidery gifts: Grandma, Nana, Gigi or Mama in a big script across the chest, with the grandkids' or kids' names stitched underneath. It sews in under half an hour and sells well, but goes wrong in predictable ways: too many names for the line, script too small for fleece, a stretched or crooked hooping, or a name spelled the way the shop guessed.

This guide covers layouts, how many names fit, fonts, sizes, hooping, spellings, adding a grandchild later, timing and pricing. For the general fleece setup, see how to embroider a sweatshirt. To lay one out now, the Mama and Grandma names maker puts the title and names together and tells you when the names get too small to stitch.

A sweatshirt embroidered with Grandma in script and the grandkids' names underneathFree design makerMama and Grandma sweatshirt name design makerType the name, pick lettering and an icon, and see it sized for the item. Then turn it into a file for your machine.Make yours

What are the most popular grandma sweatshirt layouts?

Five layouts cover most orders, each pairing a big title with smaller names:

LayoutWhat it looks likeTypical size, aboutSuits
Title over a row of namesGrandma in script, the names in one line of capitals underneath, with dots or small hearts between them8–10 in (200–250 mm) wide, 3–3.5 in (75–90 mm) tall2–5 names
Title over stacked rowsThe same, with the names in two or three centered rows8–10 in wide, 4–5 in (100–125 mm) tall6–15 names
Title on the chest, names on the sleeveThe title at center or left chest, the names running down the left sleeveSleeve letters 12–20 mm tallAny number, and easy to add to
Heart with namesA heart outline with the names inside or around it, alone on the left chest or under the title3–4 in (75–100 mm) on the left chest; 5–6 in (125–150 mm) at center3–8 short names
Small title at the necklineMama or Nana about 2–3 in (50–75 mm) wide just below the collar2–3 in wide, one linePairs with names on the sleeve

The row and stacked layouts are the classic look and need a 6×10 in hoop or larger at full width. The sleeve layout suits smaller machines and is the easiest to extend when a new grandchild arrives. A heart suits a left-chest gift or a matching set for several grandmothers.

  • Title words: Grandma, Nana, Gigi, Mimi, Oma, Abuela, Nonna or Mama, and Grandpa or Papa for a pair.
  • A third line, such as Est. 2019 or Nana's Crew, sits under the names in the same capitals.
  • Initials suit a big family: two or three fit in the space of one name.

How many grandkids' names fit, and at what letter size?

Choose the letter height first, then count. At capitals about 12 mm (½ in) tall, a 9 in (229 mm) line holds about three names in bold block capitals, or four or five in condensed capitals or script. The table assumes names of four to six letters with a dot between them; Christopher counts as about two.

Capital heightBold block capitalsCondensed capitalsScript, upper and lower case
8 mm (0.3 in)46–8Too small: the lowercase fills in
10 mm (0.4 in)35–6Too small on fleece
12 mm (½ in)34–54–5
15 mm (0.6 in)23–43–4
20 mm (0.8 in)22–33

An 8 in line takes about one name fewer at the larger sizes. Script lowercase is only about half the capital height, so script names need capitals of about 12 mm to keep the lowercase near 6 mm, the smallest that stays open on fleece. For more names, add rows rather than shrinking the letters: two rows of 12 mm condensed capitals hold about 8–10 names, three rows about 12–15, with half a letter height between rows.

  • Size the title by height, not width. With script capitals about 45 mm (1.75 in) tall, Grandma is about 8.5 in wide, Mama 6 in, Nana 5 in and Gigi under 4 in. Stretch Nana to 9 in and its capitals pass 3 in; let the names set the width instead.
  • Check the real names. The lettering size calculator shows how tall a line comes out at a given width in each font.
  • Let the maker split them. In the Mama and Grandma names maker, type the names with dots between them; if they drop under 5 mm at your size, it tells you, and you move some to the small line.

Try it with your own design

Sign up free, upload an image and get a stitch preview in under a minute.

Drop your image here

PNG, JPG, SVG, PDF or AI · stays on your device

Not sure what to expect? See real examples or how it works.

Which fonts work best for Grandma and the names?

Pair a bold script title with clean capitals for the names: a block letter holds its shape at 5 mm, while a script needs about twice that. Embrizo's lettering styles that suit it, with the smallest clean capital height (add about 1 mm on thick fleece):

FontStyleSmallest capitalsUse it for
FlowingFlowing script12 mmThe title: Grandma, Nana, Mimi
ScriptRounded script10 mmA bolder title, or script names at 12 mm and up
BlockBold sans5 mmNames in one row, read from a distance
SportCondensed sans5 mmMore names per line
TallCondensed capitals6 mmThe most names per line, and names stacked on a sleeve
  • Names in capitals avoid thin lowercase joins that sink into fleece, and sidestep McKenzie-style capitals.
  • Separators: a dot, a gap one letter wide, or a heart close to the letter height; a tiny heart stitches as a blob.
  • Big script strokes become fill. At 45 mm capitals, a script's thickest strokes can pass the 7 mm a satin column should be, so the digitizer sews them as fill or split satin. Test the title on scrap fleece.
  • Two threads are plenty: one for the title, one for the names. Tone-on-tone, such as cream on oatmeal, is a popular soft look.

The embroidery fonts previewer shows the family's names in all 12 styles. The free Grandma design is a ready-made 3.7 in title for a left chest; for a 9 in title, make it at full size, since a stitch file only scales by about 10–20% before its stitches spread apart.

How big should a grandma sweatshirt design be, and where does it go?

Make the design about 8–10 in (200–250 mm) wide on an adult sweatshirt, centered, with the top of the title about 3–4 in (75–100 mm) below the neckline seam. Scale it to the sweatshirt, not the hoop:

SweatshirtDesign width, aboutDesign height, aboutHoop
Adult S–M8 in (200 mm)3–4.5 in (75–115 mm)6×10 with the design turned, or 8×12
Adult L–XL9 in (230 mm)3–5 in (75–125 mm)6×10 turned, or 8×12
Adult 2XL and up9.5–10 in (240–250 mm)3.5–5.5 in (90–140 mm)6×10 turned, or 8×12
On a 5×7 machine6.5 in (165 mm)Up to about 4.8 in (120 mm)5×7 with the design turned
Left chest version3.5 in (90 mm)Up to about 3 in (75 mm)4×4

A 6×10 hoop sews up to about 254 × 154 mm (10 × 6 in) with the design turned 90°, enough for almost any Grandma design: rotate the design, hoop the sweatshirt sideways to match and roll the body clear. Measure the actual sweatshirt, since a cropped or boxy cut takes a smaller design.

  • Find the center by folding the sweatshirt in half and marking it in chalk; a true-size printout of the design, taped on, shows where it will sit.
  • Sleeve names start about 2–4 in below the shoulder seam on the outside of the left sleeve: one line along the arm with letters 12–20 mm tall, or names stacked in condensed capitals, each up to about 2.5–3 in (65–75 mm) wide. A stacked 15 mm name takes about 25 mm with its gap, so a 5×7 hoop holds six or seven. The sleeves guide covers hooping the tube.
  1. In the Mama and Grandma names maker, type the title and names, pick the lettering and an optional heart or flower, and choose Sweatshirt center chest (9 in wide), Sleeve or Left chest.
  2. Press Turn it into an embroidery file, set the final width in the digitizer, choose the Fleece, towel, sweatshirt preset and check the preview. Digitizing and previews are free with an account; downloading the file needs a paid plan.

What stabilizer and hooping stop crewneck fleece from stretching?

Use a medium cut-away (about 2.5 oz), a water-soluble topping and a 75/11 ballpoint needle, or 80/12 on heavy fleece, and hoop the sweatshirt smooth but never stretched. Fleece is a knit: hooped tight, it relaxes afterwards and the names pucker.

DesignBackingTopping
Title and one row of namesMedium cut-away, about 2.5 ozWater-soluble film
Stacked rows or a filled heartHeavy cut-away (3 oz), or fusible no-show mesh plus a medium cut-awayWater-soluble film
Sleeve namesFusible no-show mesh, soft on the inside of the armWater-soluble film
  1. Fuse the backing to the inside of the front, or spray the cut-away with temporary adhesive, so the fleece can't creep.
  2. Set the hoop screw to the fleece's thickness first, so the inner ring presses in without force.
  3. Slide the outer ring in through the bottom hem, with only the front and backing over it, and match your marks to the hoop's.
  4. Smooth the fleece outward with flat hands, never pulling: the knit's ribs should stay straight. If they bow, rehoop.
  5. Add the topping, roll the back and sleeves clear and check underneath that only the front and the backing are in the hoop.

If the hoop won't close over thick fleece without force, float it: hoop the cut-away alone, spray it, press the sweatshirt on and baste round the design, or use a magnetic hoop. Afterwards, trim the cut-away about ¼ in (6 mm) from the stitches and tear the topping away.

How do you check the grandkids' names with the family?

Get the names in writing, copy them exactly and send a proof before you stitch, because a name in thread can only be fixed by unpicking it. Most mistakes come from:

  • Spelling variants: Aiden, Aidan or Ayden; Sophia or Sofia; Kaylee, Kayleigh or Caleigh; Jaxon or Jackson. Never correct a spelling that looks unusual: it's probably right.
  • Nicknames or full names: Will or William, Libby or Elizabeth. Ask which ones the kids go by with Grandma.
  • The order: oldest to youngest is the usual choice. Ask, and show it on the proof.
  • Who's included: step-grandchildren, a baby on the way, or a grandchild who has died. Ask gently, and offer a small heart or a separate line rather than guessing.
  • Copy and paste the names from the customer's message into the layout instead of retyping them, and read the proof back letter by letter.

The buyer is often a son or daughter planning a surprise: ask them to check the list with a sibling, since one adult rarely knows every cousin's spelling. How to sell personalized embroidery covers proofs and personalization fields.

How do you add a name later when a new grandchild arrives?

Plan for it from the start, keep the file, and stitch the new name in the same font, height and thread. Adding to a sleeve list or a new row is easy; a centered row has to be redone.

LayoutAdding one nameHow easy
Names down the sleeveStitch the new name below the last one, at the same spacingEasy
Stacked rowsStart or extend the bottom row, centered under the othersEasy if you left room
Heart with namesFit it into the space left inside or around the heartMedium
One centered rowAdd a second row under it, or unpick the row and restitch every nameHard
  • Leave room: if more grandchildren are likely, keep about 1 in (25 mm) clear below the last row.
  • Keep a record of the file, font, letter height, thread code and sweatshirt. Batch name embroidery makes each name its own file in the same font, height and thread, so a new one made months later matches.
  • Line it up with the machine's trace or trial function, running the needle round the new name's outline and comparing it with the existing stitching.
  • To redo a row, take the old names out from the back and steam the needle holes; fleece hides holes well. See how to remove embroidery.

Sellers can offer add-a-name as a service, charged as one placement. A new spool can be a touch off the old shade, so compare them in daylight.

When should you make grandma sweatshirts for Mother's Day and Christmas?

Christmas and Mother's Day are the big waves, Grandparents Day a smaller one. Orders bunch into the few weeks before each date, so list samples about a month ahead:

OccasionDateList by, about
ChristmasDecember 25Early November
Mothering Sunday (UK and Ireland)Three weeks before Easter: March 7, 2027Early February
Mother's Day (US, Canada, Australia)The second Sunday in May: May 9, 2027Early April
Grandparents Day (US)The first Sunday after Labor Day: September 12, 2027Mid-August

Set the last order date from your processing time and the carrier's holiday send-by date, plus a couple of spare days, and order blanks early. A title with one or two rows of names is about 8,000–12,000 stitches, about 12–20 minutes at 700 stitches a minute; with proof, hooping and packing, plan on about 30–40 minutes a sweatshirt.

Practice on a free design

167 ready-to-sew designs in every machine format, free with an account.

  • Coquette bow embroidery design
  • Lemons embroidery design
  • Hot air balloon embroidery design
  • Pumpkin embroidery design
Browse free designs

How much should you charge for a grandma sweatshirt?

Price per sweatshirt from the blank, materials, time, packaging and fees, with a few names included and a charge for each extra name and a sleeve. A worked example to swap your numbers into:

CostExampleAmount
Blank crewneckA mid-weight cotton-poly sweatshirt, plus a share of the spares$14.00
Backing, topping and threadOne center-chest design$1.00
Your timeProof, hooping, about 15 minutes of sewing, trimming and packing: 35 minutes at $25 an hour$14.58
PackagingMailer and a care card$1.50
Total costBefore fees and profit$31.08
Price$31.08 ÷ (1 − 15% fee allowance − 20% profit)About $48

The 15% fee allowance is a placeholder, not any platform's rate. Price the extras by the time they add:

  • Each extra name: a small charge, such as $3.
  • Sleeve names need their own hooping: price them as a second placement.
  • Premium blanks, such as garment-dyed sweatshirts: price by the blank.
  • Matching sets batch well in one font and thread, so a small discount per extra piece still pays.

The embroidery pricing calculator prices the stitching from the stitch count, and for a family set, batch name embroidery digitizes up to 30 names at once, flagging any too wide; saving the files needs a paid plan.

Free account

Put this guide into practice

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

How big should Grandma and the names be on a sweatshirt?

On an adult sweatshirt, make the whole design about 8–10 in (200–250 mm) wide, with the script title's capitals about 1.5–2 in (40–50 mm) tall and the names in capitals about 10–15 mm. Put the top about 3–4 in below the neckline seam.

What's the smallest the names can be on a sweatshirt?

About 6 mm for block capitals on fleece, since the surface hides thin strokes, and about 12 mm capitals for script names so the lowercase stays near 6 mm. For reading across a room, 10–15 mm is better.

Where do you put the names on a grandma sweatshirt?

Under the title on the center chest, or down the outside of the left sleeve starting about 2–4 in below the shoulder seam. A small heart with the names on the left chest, about 3.5 in wide, is the subtle option.

Can you add a new grandchild's name to a finished sweatshirt?

Yes, most easily when the names run down a sleeve or in stacked rows with room below. Stitch the new name in the same font, height and thread, and use the machine's trace function to line it up. A single centered row usually has to be redone.

How much should I charge for an embroidered grandma sweatshirt?

Build it from your costs. With a $14 blank, 35 minutes at $25 an hour, materials, packaging, a 15% fee allowance and 20% profit, the example comes to about $48 with a few names included. Charge extra for more names and for sleeve names.

Keep reading

Related tools and guides

Your design, ready to stitch

Sign up free, upload an image and see it stitched in under a minute. Your image stays on your device.