Embrizo

Brother PR1X: hoop size, file format and designs

The Brother PR1X is an embroidery machine with a maximum embroidery area of 12 x 8 in (300 × 200 mm). It reads PES, PHC, DST and PEN files from a USB stick or a computer over a cable and has 495 built-in designs.

The Brother PR1X embroidery field, 300 by 200 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in300 × 200 mm field

Brother PR1X embroidery specs

Type
Single-needle embroidery
Largest embroidery area
12 x 8 in (300 × 200 mm)
Hoops included
12 x 8 in, 4 x 4 in
File formats
PES, PHC, DST, PEN
Getting designs on
USB stick; USB cable to a PC (included)
Built-in designs
495
  • Single-needle machine with a free arm, 33 built-in fonts and up to 1,000 stitches per minute.
  • Brother's manual lists USB as its only interface; it has no wireless LAN.

From Brother's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 12 x 8 in field

Your own designs

From any image to a PES file for the PR1X

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 300 × 200 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download PES

    Copy the .pes file to a USB stick and load it on the PR1X.

Free designs

Free designs that fit the PR1X

Every free design fits a 4×4 in hoop and downloads as PES with a free account.

All free Brother designs

Free account

Make your first design for the PR1X

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Brother PR1X questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Brother PR1X?

Its largest embroidery field is 12 x 8 in (300 × 200 mm). It comes with 12 x 8 in and 4 x 4 in hoops. Designs must fit inside the field of the hoop you use.

What file format does the Brother PR1X use?

It reads PES, PHC, DST and PEN files. Use PES for the best results: it keeps the thread colors.

How do I get designs onto the Brother PR1X?

Use a USB stick or a computer over a cable (USB stick; USB cable to a PC (included)). With a USB stick, copy the .pes file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Brother PR1X?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 12 x 8 in field and download a PES file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Brother PR1X?

At this field size: left chest, right chest, center chest, full front, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes. Larger placements like full back need a bigger field or a split design.

Other Brother models

Popular embroidery machines

Designs for your PR1X, in seconds

Sign up free, upload any image and download a PES file sized for your machine.