Embrizo

Baby Lock Flare: hoop size, file format and designs

The Baby Lock Flare is an embroidery machine with a maximum embroidery area of 6-1/4 x 10-1/4 in (160 × 260 mm). It reads PES, PHC and DST files from a USB stick or Wi-Fi and has 293 built-in designs.

The Baby Lock Flare embroidery field, 160 by 260 mm, with a sunflower design and a 4 by 4 inch field for scale4×4 in160 × 260 mm field

Baby Lock Flare embroidery specs

Type
Single-needle embroidery
Largest embroidery area
6-1/4 x 10-1/4 in (160 × 260 mm)
Hoops included
6-1/4 x 10-1/4 in, 5 x 7 in
File formats
PES, PHC, DST
Getting designs on
USB stick; Wireless LAN (Design Database Transfer from a PC)
Built-in designs
293
  • Embroidery-only machine; it does not sew regular stitches.
  • 14 built-in embroidery fonts; reads designs of up to 200,000 stitches.

From Baby Lock's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 6-1/4 x 10-1/4 in field

Your own designs

From any image to a PES file for the Flare

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 160 × 260 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download PES

    Copy the .pes file to a USB stick and load it on the Flare.

Free designs

Free designs that fit the Flare

Every free design fits a 4×4 in hoop and downloads as PES with a free account.

All free Baby Lock designs

Free account

Make your first design for the Flare

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Baby Lock Flare questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Baby Lock Flare?

Its largest embroidery field is 6-1/4 x 10-1/4 in (160 × 260 mm). It comes with 6-1/4 x 10-1/4 in and 5 x 7 in hoops. Designs must fit inside the field of the hoop you use.

What file format does the Baby Lock Flare use?

It reads PES, PHC and DST files. Use PES for the best results: it keeps the thread colors.

How do I get designs onto the Baby Lock Flare?

Use a USB stick or Wi-Fi (USB stick; Wireless LAN (Design Database Transfer from a PC)). With a USB stick, copy the .pes file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Baby Lock Flare?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 6-1/4 x 10-1/4 in field and download a PES file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Baby Lock Flare?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other Baby Lock models

Popular embroidery machines

Sources (November 2026)

Baby Lock and Flare are trademarks of their owners. Embrizo isn't affiliated with Baby Lock.

Designs for your Flare, in seconds

Sign up free, upload any image and download a PES file sized for your machine.