Embrizo

Brother Innov-is V3: hoop size, file format and designs

The Brother Innov-is V3 is an embroidery machine with a maximum embroidery area of 12 x 7 in (300 × 180 mm). It reads PES, PHC and DST files from a USB stick or a computer over a cable.

The Brother Innov-is V3 embroidery field, 300 by 180 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in300 × 180 mm field

Brother Innov-is V3 embroidery specs

Type
Single-needle embroidery
Largest embroidery area
12 x 7 in (300 × 180 mm)
File formats
PES, PHC, DST
Getting designs on
USB stick; USB cable to a PC (included)
Sold in
Europe
  • Embroidery-only machine with speeds up to 1,050 stitches per minute; a 300 x 180 mm frame is included and other included frames vary by country.
  • Brother lists the same operation manual for it and the VE2200 sold in North America.

From Brother's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 12 x 7 in field

Your own designs

From any image to a PES file for the Innov-is V3

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 300 × 180 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download PES

    Copy the .pes file to a USB stick and load it on the Innov-is V3.

Free designs

Free designs that fit the Innov-is V3

Every free design fits a 4×4 in hoop and downloads as PES with a free account.

All free Brother designs

Free account

Make your first design for the Innov-is V3

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Brother Innov-is V3 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Brother Innov-is V3?

Its largest embroidery field is 12 x 7 in (300 × 180 mm). Designs must fit inside the field of the hoop you use.

What file format does the Brother Innov-is V3 use?

It reads PES, PHC and DST files. Use PES for the best results: it keeps the thread colors.

How do I get designs onto the Brother Innov-is V3?

Use a USB stick or a computer over a cable (USB stick; USB cable to a PC (included)). With a USB stick, copy the .pes file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Brother Innov-is V3?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 12 x 7 in field and download a PES file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Brother Innov-is V3?

At this field size: left chest, right chest, center chest, full front, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes. Larger placements like full back need a bigger field or a split design.

Other Brother models

Popular embroidery machines

Designs for your Innov-is V3, in seconds

Sign up free, upload any image and download a PES file sized for your machine.