Embrizo

bernette 70 DECO: hoop size, file format and designs

The bernette 70 DECO is an embroidery machine with a maximum embroidery area of 10.2 x 6.3 in (260 × 160 mm). It reads EXP, DST, PES, PEC, JEF, VP3, VIP and HUS files from a USB stick and has 208 built-in designs.

The bernette 70 DECO embroidery field, 260 by 160 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in260 × 160 mm field

bernette 70 DECO embroidery specs

Type
Single-needle embroidery
Largest embroidery area
10.2 x 6.3 in (260 × 160 mm)
Hoops included
Large, 160 x 260 mm, Medium, 120 x 180 mm, Small, 50 x 70 mm
File formats
EXP, DST, PES, PEC, JEF, VP3, VIP, HUS
Getting designs on
USB stick
Built-in designs
208
  • Embroidery-only machine; it does not sew regular stitches.
  • 7 embroidery alphabets; embroiders at up to 850 stitches per minute.

From bernette's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 10.2 x 6.3 in field

Your own designs

From any image to a EXP file for the 70 DECO

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 260 × 160 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download EXP

    Copy the .exp file to a USB stick and load it on the 70 DECO.

Free designs

Free designs that fit the 70 DECO

Every free design fits a 4×4 in hoop and downloads as EXP with a free account.

All free designs

Free account

Make your first design for the 70 DECO

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

bernette 70 DECO questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the bernette 70 DECO?

Its largest embroidery field is 10.2 x 6.3 in (260 × 160 mm). It comes with Large, 160 x 260 mm, Medium, 120 x 180 mm and Small, 50 x 70 mm hoops. Designs must fit inside the field of the hoop you use.

What file format does the bernette 70 DECO use?

It reads EXP, DST, PES, PEC, JEF, VP3, VIP and HUS files. Use EXP for the best results: it keeps the thread colors.

How do I get designs onto the bernette 70 DECO?

Use a USB stick (USB stick). With a USB stick, copy the .exp file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the bernette 70 DECO?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 10.2 x 6.3 in field and download a EXP file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the bernette 70 DECO?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other bernette models

Popular embroidery machines

Designs for your 70 DECO, in seconds

Sign up free, upload any image and download a EXP file sized for your machine.