Tajima TMBP2-SC: hoop size, file format and designs
The Tajima TMBP2-SC is a multi-needle commercial embroidery machine with a maximum embroidery area of 14.1 x 19.6 in (360 × 500 mm).
Tajima TMBP2-SC embroidery specs
- Type
- Multi-needle commercial
- Largest embroidery area
- 14.1 x 19.6 in (360 × 500 mm)
- Single-head machine built with 6, 12 or 15 needles; maximum speed 1,200 rpm.
- 12.1-inch touch panel; the wide cap frame field is 75 x 360 mm.
From Tajima's published specifications, checked November 2026. Models vary by country; your manual has the final word.
What fits in the 14.1 x 19.6 in field
- Left chestfits (3.5 × 2.25 in)
- Right chestfits (3 × 1 in)
- Center chestfits (6 × 4 in)
- Full frontfits (10 × 7 in)
- Back of the neckfits (3 × 0.9 in)
- Full backfits (11 × 8 in)
- Upper sleevefits (2.5 × 1.6 in)
- Cap frontfits (4.25 × 2 in)
- Cap sidefits (2.25 × 1.1 in)
- Cap backfits (2.5 × 0.9 in)
- Beanie cufffits (3.5 × 1.4 in)
- Tote bagfits (8 × 6 in)
- Bath towelfits (8 × 3 in)
- Hand towelfits (5 × 1.75 in)
From any image to a DST file for the TMBP2-SC
Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.
- 1
Upload the artwork
PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.
- 2
Size it for the field
Keep the design inside 360 × 500 mm, or smaller for the hoop you'll use.
- 3
Check the stitches
Watch the sew-out preview and the design check before anything touches fabric.
- 4
Download DST
Send the .dst file to the TMBP2-SC the way your setup allows.
Free designs that fit the TMBP2-SC
Every free design fits a 4×4 in hoop and downloads as DST with a free account.
Free account
Make your first design for the TMBP2-SC
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Tajima TMBP2-SC questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What hoop size is the Tajima TMBP2-SC?
Its largest embroidery field is 14.1 x 19.6 in (360 × 500 mm). Designs must fit inside the field of the hoop you use.
What file format does the Tajima TMBP2-SC use?
Tajima TMBP2-SC machines use the DST format for designs. Check the manual for any other formats your model reads.
How do I get designs onto the Tajima TMBP2-SC?
Copy the design file to a USB stick and load it from the machine's screen.
Can I make my own designs for the Tajima TMBP2-SC?
Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 14.1 x 19.6 in field and download a DST file for the machine. Digitizing and previewing are free with an account.
What can I embroider on the Tajima TMBP2-SC?
At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.
Other Tajima models
Popular embroidery machines
- How to transfer designs to a Tajima machine
- Tajima TMBP2-SC software
- Machine comparison chart
- All machine hoop sizes
- Ricoma MT-1501
- Ricoma Marquee 2001
- Ricoma Marquee 2002
- Barudan BEKT-S1501CBIII
- BAI THE MIRROR
- BAI THE VISION
- Melco SUMMIT
- Melco EMT16X
- Happy Japan HCD3-1501
- Barudan BEKT-S1501CII
- Melco BRAVO
- Happy Japan HCS3-1201 Voyager
Sources (November 2026)
Tajima and TMBP2-SC are trademarks of their owners. Embrizo isn't affiliated with Tajima.
Designs for your TMBP2-SC, in seconds
Sign up free, upload any image and download a DST file sized for your machine.






