Melco BRAVO: hoop size, file format and designs
The Melco BRAVO is a multi-needle commercial embroidery machine with a maximum embroidery area of 12.6 x 10.25 in (320 × 260 mm). It reads OFM, EXP, DST and ARTX files from a computer over a cable.
Melco BRAVO embroidery specs
- Type
- Multi-needle commercial
- Largest embroidery area
- 12.6 x 10.25 in (320 × 260 mm)
- File formats
- OFM, EXP, DST, ARTX
- Getting designs on
- LAN cable from a PC
- 16 needles; top speed 1,000 stitches per minute.
- Runs from BRAVO OS on a connected computer; the cap frame sews 6 x 3.2 in with the cap frame system installed.
From Melco's published specifications, checked November 2026. Models vary by country; your manual has the final word.
What fits in the 12.6 x 10.25 in field
- Left chestfits (3.5 × 2.25 in)
- Right chestfits (3 × 1 in)
- Center chestfits (6 × 4 in)
- Full frontfits (10 × 7 in)
- Back of the neckfits (3 × 0.9 in)
- Full backfits (11 × 8 in)
- Upper sleevefits (2.5 × 1.6 in)
- Cap frontfits (4.25 × 2 in)
- Cap sidefits (2.25 × 1.1 in)
- Cap backfits (2.5 × 0.9 in)
- Beanie cufffits (3.5 × 1.4 in)
- Tote bagfits (8 × 6 in)
- Bath towelfits (8 × 3 in)
- Hand towelfits (5 × 1.75 in)
From any image to a DST file for the BRAVO
Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.
- 1
Upload the artwork
PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.
- 2
Size it for the field
Keep the design inside 320 × 260 mm, or smaller for the hoop you'll use.
- 3
Check the stitches
Watch the sew-out preview and the design check before anything touches fabric.
- 4
Download DST
Send the .dst file to the BRAVO the way your setup allows.
Free designs that fit the BRAVO
Every free design fits a 4×4 in hoop and downloads as DST with a free account.
Free account
Make your first design for the BRAVO
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Melco BRAVO questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What hoop size is the Melco BRAVO?
Its largest embroidery field is 12.6 x 10.25 in (320 × 260 mm). Designs must fit inside the field of the hoop you use.
What file format does the Melco BRAVO use?
It reads OFM, EXP, DST and ARTX files. Use DST for the best results: it's the standard for commercial machines.
How do I get designs onto the Melco BRAVO?
Use a computer over a cable (LAN cable from a PC). Send the .dst file from your computer, then pick the design on the machine.
Can I make my own designs for the Melco BRAVO?
Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 12.6 x 10.25 in field and download a DST file for the machine. Digitizing and previewing are free with an account.
What can I embroider on the Melco BRAVO?
At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.
Other Melco models
Popular embroidery machines
Sources (November 2026)
Melco and BRAVO are trademarks of their owners. Embrizo isn't affiliated with Melco.
Designs for your BRAVO, in seconds
Sign up free, upload any image and download a DST file sized for your machine.






