Embrizo

Happy Japan HCD3-1501: hoop size, file format and designs

The Happy Japan HCD3-1501 is a multi-needle commercial embroidery machine with a maximum embroidery area of 15.7 x 20.5 in (400 × 520 mm). It reads TAP, DST, DSB and DSZ files from a USB stick or a computer over a cable and has 100 built-in designs.

The Happy Japan HCD3-1501 embroidery field, 400 by 520 mm, with a sunflower design and a 4 by 4 inch field for scale4×4 in400 × 520 mm field

Happy Japan HCD3-1501 embroidery specs

Type
Multi-needle commercial
Largest embroidery area
15.7 x 20.5 in (400 × 520 mm)
Hoops included
4.7 in round, 5.9 in round, 12.5 in square, 17.25 x 16.5 in, wide-field cap hoop
File formats
TAP, DST, DSB, DSZ
Getting designs on
USB stick; LAN cable from a PC; USB cable from a PC
Built-in designs
100
  • 15 needles with a servo drive; up to 1,200 stitches per minute on flat goods and 1,000 on caps.
  • The full 20.5 in width needs optional attachments; the largest included hoop is 17.25 x 16.5 in.

From Happy Japan's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 15.7 x 20.5 in field

Your own designs

From any image to a DST file for the HCD3-1501

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 400 × 520 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download DST

    Copy the .dst file to a USB stick and load it on the HCD3-1501.

Free designs

Free designs that fit the HCD3-1501

Every free design fits a 4×4 in hoop and downloads as DST with a free account.

All free designs

Free account

Make your first design for the HCD3-1501

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Happy Japan HCD3-1501 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Happy Japan HCD3-1501?

Its largest embroidery field is 15.7 x 20.5 in (400 × 520 mm). It comes with 4.7 in round, 5.9 in round, 12.5 in square, 17.25 x 16.5 in and wide-field cap hoop hoops. Designs must fit inside the field of the hoop you use.

What file format does the Happy Japan HCD3-1501 use?

It reads TAP, DST, DSB and DSZ files. Use DST for the best results: it's the standard for commercial machines.

How do I get designs onto the Happy Japan HCD3-1501?

Use a USB stick or a computer over a cable (USB stick; LAN cable from a PC; USB cable from a PC). With a USB stick, copy the .dst file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Happy Japan HCD3-1501?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 15.7 x 20.5 in field and download a DST file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Happy Japan HCD3-1501?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Happy Japan models

Popular embroidery machines

Designs for your HCD3-1501, in seconds

Sign up free, upload any image and download a DST file sized for your machine.