Embrizo

Melco EMT16X: hoop size, file format and designs

The Melco EMT16X is a multi-needle commercial embroidery machine with a maximum embroidery area of 16.1 x 15.5 in (410 × 393 mm). It reads OFM, EXP, DST and ARTX files from a computer over a cable.

The Melco EMT16X embroidery field, 410 by 393 mm, with a fox design and a 4 by 4 inch field for scale4×4 in410 × 393 mm field

Melco EMT16X embroidery specs

Type
Multi-needle commercial
Largest embroidery area
16.1 x 15.5 in (410 × 393 mm)
File formats
OFM, EXP, DST, ARTX
Getting designs on
LAN cable from a PC
  • 16 needles; 300 to 1,500 stitches per minute on flat items and up to 1,200 on caps.
  • Runs from Melco OS on a connected computer; one computer can control up to 30 machines over Ethernet.

From Melco's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 16.1 x 15.5 in field

Your own designs

From any image to a DST file for the EMT16X

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 410 × 393 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download DST

    Send the .dst file to the EMT16X the way your setup allows.

Free designs

Free designs that fit the EMT16X

Every free design fits a 4×4 in hoop and downloads as DST with a free account.

All free designs

Free account

Make your first design for the EMT16X

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Melco EMT16X questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Melco EMT16X?

Its largest embroidery field is 16.1 x 15.5 in (410 × 393 mm). Designs must fit inside the field of the hoop you use.

What file format does the Melco EMT16X use?

It reads OFM, EXP, DST and ARTX files. Use DST for the best results: it's the standard for commercial machines.

How do I get designs onto the Melco EMT16X?

Use a computer over a cable (LAN cable from a PC). Send the .dst file from your computer, then pick the design on the machine.

Can I make my own designs for the Melco EMT16X?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 16.1 x 15.5 in field and download a DST file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Melco EMT16X?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Melco models

Popular embroidery machines

Sources (November 2026)

Melco and EMT16X are trademarks of their owners. Embrizo isn't affiliated with Melco.

Designs for your EMT16X, in seconds

Sign up free, upload any image and download a DST file sized for your machine.