Embrizo

Husqvarna Viking Designer Topaz 40: hoop size, file format and designs

The Husqvarna Viking Designer Topaz 40 is a sewing and embroidery machine with a maximum embroidery area of 9.5 x 6 in (240 × 150 mm). It reads VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files from a USB stick.

The Husqvarna Viking Designer Topaz 40 embroidery field, 240 by 150 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in240 × 150 mm field

Husqvarna Viking Designer Topaz 40 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
9.5 x 6 in (240 × 150 mm)
Hoops included
DESIGNER Jewel Hoop, 240 x 150 mm
File formats
VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP, DST
Getting designs on
USB stick
  • A 1 GB USB embroidery stick is included; designs and updates load from the stick.
  • Embroiders at up to 800 stitches per minute; up to 5 designs can be combined on screen.

From Husqvarna Viking's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 9.5 x 6 in field

Your own designs

From any image to a VP3 file for the Designer Topaz 40

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 240 × 150 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download VP3

    Copy the .vp3 file to a USB stick and load it on the Designer Topaz 40.

Free designs

Free designs that fit the Designer Topaz 40

Every free design fits a 4×4 in hoop and downloads as VP3 with a free account.

All free Husqvarna Viking designs

Free account

Make your first design for the Designer Topaz 40

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Husqvarna Viking Designer Topaz 40 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Husqvarna Viking Designer Topaz 40?

Its largest embroidery field is 9.5 x 6 in (240 × 150 mm). It comes with DESIGNER Jewel Hoop, 240 x 150 mm hoop. Designs must fit inside the field of the hoop you use.

What file format does the Husqvarna Viking Designer Topaz 40 use?

It reads VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files. Use VP3 for the best results: it keeps the thread colors.

How do I get designs onto the Husqvarna Viking Designer Topaz 40?

Use a USB stick (USB stick). With a USB stick, copy the .vp3 file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Husqvarna Viking Designer Topaz 40?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 9.5 x 6 in field and download a VP3 file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Husqvarna Viking Designer Topaz 40?

At this field size: left chest, right chest, center chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff, bath towel and hand towel designs at their typical sizes. Larger placements like full front or full back need a bigger field or a split design.

Other Husqvarna Viking models

Popular embroidery machines

Sources (November 2026)

Husqvarna Viking and Designer Topaz 40 are trademarks of their owners. Embrizo isn't affiliated with Husqvarna Viking.

Designs for your Designer Topaz 40, in seconds

Sign up free, upload any image and download a VP3 file sized for your machine.