Embrizo

Husqvarna Viking Designer Epic 2: hoop size, file format and designs

The Husqvarna Viking Designer Epic 2 is a sewing and embroidery machine with a maximum embroidery area of 14.2 x 13.8 in (360 × 350 mm). It reads VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files from a USB stick or Wi-Fi.

The Husqvarna Viking Designer Epic 2 embroidery field, 360 by 350 mm, with a fox design and a 4 by 4 inch field for scale4×4 in360 × 350 mm field

Husqvarna Viking Designer Epic 2 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
14.2 x 13.8 in (360 × 350 mm)
Hoops included
DESIGNER Imperial Hoop, 360 x 260 mm, DESIGNER Crown Hoop, 260 x 200 mm, DESIGNER Splendid Square Hoop, 120 x 120 mm
File formats
VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP, DST
Getting designs on
USB stick; WiFi (mySewnet)
  • The 360 x 350 mm field needs the optional DESIGNER Majestic Hoop, which is turned partway through; the largest included hoop is 360 x 260 mm.
  • Over 750 built-in designs and 8 embroidery fonts; embroiders at up to 1,000 stitches per minute.

From Husqvarna Viking's published specifications, checked November 2026. Models vary by country; your manual has the final word.

What fits in the 14.2 x 13.8 in field

Your own designs

From any image to a VP3 file for the Designer Epic 2

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 360 × 350 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download VP3

    Copy the .vp3 file to a USB stick and load it on the Designer Epic 2.

Free designs

Free designs that fit the Designer Epic 2

Every free design fits a 4×4 in hoop and downloads as VP3 with a free account.

All free Husqvarna Viking designs

Free account

Make your first design for the Designer Epic 2

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Husqvarna Viking Designer Epic 2 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Husqvarna Viking Designer Epic 2?

Its largest embroidery field is 14.2 x 13.8 in (360 × 350 mm). It comes with DESIGNER Imperial Hoop, 360 x 260 mm, DESIGNER Crown Hoop, 260 x 200 mm and DESIGNER Splendid Square Hoop, 120 x 120 mm hoops. Designs must fit inside the field of the hoop you use.

What file format does the Husqvarna Viking Designer Epic 2 use?

It reads VP3, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files. Use VP3 for the best results: it keeps the thread colors.

How do I get designs onto the Husqvarna Viking Designer Epic 2?

Use a USB stick or Wi-Fi (USB stick; WiFi (mySewnet)). With a USB stick, copy the .vp3 file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Husqvarna Viking Designer Epic 2?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 14.2 x 13.8 in field and download a VP3 file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Husqvarna Viking Designer Epic 2?

At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.

Other Husqvarna Viking models

Popular embroidery machines

Designs for your Designer Epic 2, in seconds

Sign up free, upload any image and download a VP3 file sized for your machine.