Husqvarna Viking Designer Epic 3: hoop size, file format and designs
The Husqvarna Viking Designer Epic 3 is a sewing and embroidery machine with a maximum embroidery area of 17-3/4 x 17-3/4 in (450 × 450 mm). It reads VP3, VP4, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files from a USB stick or Wi-Fi and has 912 built-in designs.
Husqvarna Viking Designer Epic 3 embroidery specs
- Type
- Sewing and embroidery combo
- Largest embroidery area
- 17-3/4 x 17-3/4 in (450 × 450 mm)
- Hoops included
- DESIGNER Regal Hoop, 465 x 260 mm, DESIGNER Royal Hoop II, 360 x 200 mm, DESIGNER Jewel Hoop II, 240 x 150 mm, DESIGNER Splendid Square Hoop II, 120 x 120 mm
- File formats
- VP3, VP4, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP, DST
- Getting designs on
- USB stick; WiFi (mySewnet)
- Built-in designs
- 912
- The 450 x 450 mm field needs the optional Mega Turnable Hoop, which is turned 180 degrees partway through; the largest included hoop is 465 x 260 mm.
- A built-in projector shows the design on the hooped fabric; Singer's store now calls the mySewnet service CREATIVATE.
From Husqvarna Viking's published specifications, checked November 2026. Models vary by country; your manual has the final word.
What fits in the 17-3/4 x 17-3/4 in field
- Left chestfits (3.5 × 2.25 in)
- Right chestfits (3 × 1 in)
- Center chestfits (6 × 4 in)
- Full frontfits (10 × 7 in)
- Back of the neckfits (3 × 0.9 in)
- Full backfits (11 × 8 in)
- Upper sleevefits (2.5 × 1.6 in)
- Cap frontfits (4.25 × 2 in)
- Cap sidefits (2.25 × 1.1 in)
- Cap backfits (2.5 × 0.9 in)
- Beanie cufffits (3.5 × 1.4 in)
- Tote bagfits (8 × 6 in)
- Bath towelfits (8 × 3 in)
- Hand towelfits (5 × 1.75 in)
From any image to a VP3 file for the Designer Epic 3
Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.
- 1
Upload the artwork
PNG, JPG, SVG, PDF or AI. A clean logo or a drawing with flat colors works best.
- 2
Size it for the field
Keep the design inside 450 × 450 mm, or smaller for the hoop you'll use.
- 3
Check the stitches
Watch the sew-out preview and the design check before anything touches fabric.
- 4
Download VP3
Copy the .vp3 file to a USB stick and load it on the Designer Epic 3.
Free designs that fit the Designer Epic 3
Every free design fits a 4×4 in hoop and downloads as VP3 with a free account.
Free account
Make your first design for the Designer Epic 3
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Husqvarna Viking Designer Epic 3 questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
What hoop size is the Husqvarna Viking Designer Epic 3?
Its largest embroidery field is 17-3/4 x 17-3/4 in (450 × 450 mm). It comes with DESIGNER Regal Hoop, 465 x 260 mm, DESIGNER Royal Hoop II, 360 x 200 mm, DESIGNER Jewel Hoop II, 240 x 150 mm and DESIGNER Splendid Square Hoop II, 120 x 120 mm hoops. Designs must fit inside the field of the hoop you use.
What file format does the Husqvarna Viking Designer Epic 3 use?
It reads VP3, VP4, SHV, DHV, VIP, HUS, PEC, PES, PCS, XXX, SEW, JEF, EXP and DST files. Use VP3 for the best results: it keeps the thread colors.
How do I get designs onto the Husqvarna Viking Designer Epic 3?
Use a USB stick or Wi-Fi (USB stick; WiFi (mySewnet)). With a USB stick, copy the .vp3 file to the stick, plug it into the machine and pick the design on the screen.
Can I make my own designs for the Husqvarna Viking Designer Epic 3?
Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 17-3/4 x 17-3/4 in field and download a VP3 file for the machine. Digitizing and previewing are free with an account.
What can I embroider on the Husqvarna Viking Designer Epic 3?
At this field size: left chest, right chest, center chest, full front, back of the neck, full back, upper sleeve, cap front, cap side, cap back, beanie cuff, tote bag, bath towel and hand towel designs at their typical sizes.
Other Husqvarna Viking models
Popular embroidery machines
- How to transfer designs to a Husqvarna Viking machine
- Husqvarna Viking Designer Epic 3 software
- Machine comparison chart
- All machine hoop sizes
- Brother Aveneer EV1
- Janome Continental M17
- Pfaff creative icon 2
- Pfaff creative 4.5
- Bernina 990
- Brother Luminaire XP3
- Brother Luminaire XP2
- Baby Lock Solaris Vision
- Bernina 880 PLUS
- Brother Stellaire XJ1
- Baby Lock Altair 2
- Bernina 790 PRO
Sources (November 2026)
- singer.com/products/husqvarnaviking-designer-epic-3-sewing-embroidery-machine
- svpworldwide.widen.net/content/vzvf9xhkkk/pdf/471131326D-Designer-Epic-3-manual-EN.pdf?u=inl4uz
- singer.com/products/husqvarnaviking-mega-turnable-hoop
- europe.singer.com/products/husqvarnaviking-designer-epic-3-sewing-embroidery-machine
Husqvarna Viking and Designer Epic 3 are trademarks of their owners. Embrizo isn't affiliated with Husqvarna Viking.
Designs for your Designer Epic 3, in seconds
Sign up free, upload any image and download a VP3 file sized for your machine.






