Can you embroider on nylon?
Yes, you can embroider nylon jackets, windbreakers and bags. Use a fine sharp needle (65/9–70/10), a light tear-away or cut-away and a low-density design, because the tight, slippery weave puckers and the holes don't close up. Embroider only the outer layer where you can (open a lining seam), float or hoop gently, and avoid big satin columns.
Verdict: Yes, with care
Needle
Sharp 65/9–70/10
Stabilizer
Light tear-away or cut-away
Topping
Not needed
Design density
Low
Hooping
Hoop the shell only; float if padded
How to embroider on nylon
- 1
Prepare
Fit a sharp 65/9–70/10 needle and cut light tear-away or cut-away a little bigger than the hoop.
- 2
Hoop
Hoop the shell only; float if padded.
- 3
Digitize
Pick a design with low, sized for the item, with the right fabric setting.
- 4
Stitch and finish
Sew a test first, then trim and finish.
Tips for nylon
- Open the lining to stitch through the shell alone.
- Use small, light designs on windbreakers.
- Slow down to reduce puckering.
- Test on an inside facing or pocket.
Avoid
- Stitching through padding and lining together.
- Dense fills that pucker the weave.
Try it on nylon
Start with a free design, or your own artwork
Every free design downloads in every machine format with a free account. Or upload a logo and Embrizo digitizes it with settings for the fabric you pick.
Free account
Designs tuned for nylon
Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.
- Digitize and preview any image
- Realistic stitch preview and sew-out
- Download free ready-made designs
- No credit card needed
Embroidering nylon: questions
The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.
Can you embroider on nylon?
Yes, you can embroider nylon jackets, windbreakers and bags. Use a fine sharp needle (65/9–70/10), a light tear-away or cut-away and a low-density design, because the tight, slippery weave puckers and the holes don't close up. Embroider only the outer layer where you can (open a lining seam), float or hoop gently, and avoid big satin columns.
What needle should I use for nylon?
Sharp 65/9–70/10. Change it often; a dull needle drags and can mark or tear nylon.
What stabilizer is best for nylon?
Light tear-away or cut-away.
How dense should designs be on nylon?
Low. Embrizo's fabric settings adjust density, underlay and pull compensation when you digitize.
Can I get a design digitized for nylon?
Yes. Upload your logo or artwork to Embrizo, pick the closest fabric setting and download a file for your machine, with a realistic stitch preview first.
Can you embroider on…
Ready to stitch on nylon?
Sign up free, upload a logo or picture, pick the fabric and get a ready-to-sew file with a realistic stitch preview first.