Singer SE9180: hoop size, file format and designs

The Singer SE9180 is a sewing and embroidery machine with a maximum embroidery area of 6.7 x 3.9 in (170 × 100 mm). It reads VP3 files from a USB stick and has 150 built-in designs.

The Singer SE9180 embroidery field, 170 by 100 mm, with a jacket back logo and a 4 by 4 inch field for scale4×4 in170 × 100 mm field

Singer SE9180 embroidery specs

Type
Sewing and embroidery combo
Largest embroidery area
6.7 x 3.9 in (170 × 100 mm)
Hoops included
170 x 100 mm
File formats
VP3
Getting designs on
USB stick
Built-in designs
150
  • Singer's SE9180 FAQ says the machine is not WiFi enabled and takes designs by USB stick.
  • Some Singer bundles add 40 x 40 mm and 100 x 100 mm hoops.

From Singer's published specifications, checked October 2026. Models vary by country; your manual has the final word.

What fits in the 6.7 x 3.9 in field

Your own designs

From any image to a VP3 file for the SE9180

Upload a logo, a drawing or a pet photo. Embrizo separates the colors, picks the stitches and writes a file your machine reads.

  1. 1

    Upload the artwork

    PNG, JPG, WebP or SVG. A clean logo or a drawing with flat colors works best.

  2. 2

    Size it for the field

    Keep the design inside 170 × 100 mm, or smaller for the hoop you'll use.

  3. 3

    Check the stitches

    Watch the sew-out preview and the design check before anything touches fabric.

  4. 4

    Download VP3

    Copy the .vp3 file to a USB stick and load it on the SE9180.

Free designs

Free designs that fit the SE9180

Every free design fits a 4×4 in hoop and downloads as VP3 with a free account.

All free designs

Free account

Make your first design for the SE9180

Create a free account to digitize any image, try every setting and watch it sew. Choose a plan only when you want to download files.

  • Digitize and preview any image
  • Realistic stitch preview and sew-out
  • Download free ready-made designs
  • No credit card needed
FAQ

Singer SE9180 questions

The quickest way to see what it does with your artwork is to try it. With a free account, digitizing and previewing cost nothing and take about a minute.

What hoop size is the Singer SE9180?

Its largest embroidery field is 6.7 x 3.9 in (170 × 100 mm). It comes with 170 x 100 mm hoop. Designs must fit inside the field of the hoop you use.

What file format does the Singer SE9180 use?

It reads VP3 files. Use VP3 for the best results: it keeps the thread colors.

How do I get designs onto the Singer SE9180?

Use a USB stick (USB stick). With a USB stick, copy the .vp3 file to the stick, plug it into the machine and pick the design on the screen.

Can I make my own designs for the Singer SE9180?

Yes. Upload a logo, drawing or photo to Embrizo, set the size to fit the 6.7 x 3.9 in field and download a VP3 file for the machine. Digitizing and previewing are free with an account.

What can I embroider on the Singer SE9180?

At this field size: left chest, right chest, back of the neck, upper sleeve, cap front, cap side, cap back, beanie cuff and hand towel designs at their typical sizes. Larger placements like center chest or full front need a bigger field or a split design.

Other Singer models

Popular embroidery machines

Designs for your SE9180, in seconds

Sign up free, upload any image and download a VP3 file sized for your machine.